BlueGate Brave Analog gsm gateway

The BlueGate Brave Analog is a GSM gateway equipped with a large number of programmable functions that increase users´ comfort. Using the Telit GL865 module inside, it is designed for 850/900/1800/1900MHz GSM networks.

Product variants

Attachment	Size
ENG-BlueGate-Brave-GSM-gateway-datasheet	354.29 KB
ENG-BlueGate-Brave-GSM-gateway-manual	549.05 KB
Setup program GGset	503.6 KB
Driver for the USB cable	876.77 KB

By connecting to your PBX, it allows you to call all branches via the GSM network, incoming calls can use the DISA dial-up
SMS programming function when used with the emergency lift - elevator - intercoms. An optional feature, upon request only.
Changing the polarity of the telephone line during a call allows exchanges to accurately detect the establishment and termination of a connection
CLIP supports the most common standard
Pseudo-tariffing allows you to monitor the actual length of the call (1st charging pulse only after the call is picked up by the other party) the GSM gateway
The signal in minute intervals to the call allows you to distinguish the GSM connection from the normal call
The monitoring system allows sending an SMS to a preset number in the event of a power failure, network login, set a number of rings without answering (the called party/device does not respond to the ringing), etc.
Direct Call (Baby Call) - automatic dialing of the number stored on the SIM immediately after picking up the handset at the phone connected to the gateway
Dimensions 100mm x 130mm × 37mm
Power supply 8-12VAC / DC, 500 mA
Additional backup battery for about 12 hours of operation
BlueGate A Brave has the characteristics of a regular state line
Operation on frequencies 850/900/1800/1900Mhz
Additional USB interface for use as a GSM modem (data, SMS with SMS-Mail, etc.)
Setting gateway parameters both by phone and computer (via USB accessory)
Tariff 16/12 kHz
CLIP FSK
DTMF tone selection t> 30 ms
Polarity changes on the line when establishing/terminating a connection
Backward compatibility with the MiniGate GSM gateway
9 memories for allowed call directions
DTMF INBAND / OUTBAND
Enable / Disable roaming
Call time limit
Timestamps in a call
Sending the set SMS to the preset number when the power drops below the specified limit, lasting longer than the specified time
Sending the set SMS to the default number every time the gateway logs in to the GSM network
Sending the set SMS to the preset number when the gateway rings more than the set number (upon incoming call) without answering
Sending the set SMS to the preset number when the input changes last longer than the set time (additional extension - input board)
Periodic sending of status SMS in the set interval of 1-30 days. The SMS contains the time and date of sending (time set on the gateway clock - local / GSM), GSM network status, power supply voltage, GSM module temperature, and last dialed number. (additional extension - program in the gateway)